CO2-instructions | Crosman Magazine

In your kit you shall find:

2x M3x30 Bolts

2x M3 nut

Clamp

CO2 holder

Step 1

Firmly insert the nuts into the

hexagonal holes of the clamp.

Push them inside with the bolt head to ensure they are all the way in and flush.

Step 2

Slide the CO2 holder onto the stock as shown.

Step 3

Place the clamp over the stock and CO2 holder.

Step 4

Insert both bolts and tighten.

If the bolts are not tightening properly, make sure the nuts are still in all the way.